Simple retrofit
Geeignet für alle Motorentypen und einfach nachrüstbar
Emission Applications
Mine gas
There are numerous mine gas-fired CHP plants in Germany. In this so-called combined heat and power (CHP) system, mine gas is burned in a combustion engine and converted into electricity and heat. In the course of the energy transition, CHP plants are used by mine gas operators for flexible and decentralized energy generation to replace conventional energy sources.
To comply with legal requirements, these CHP units require exhaust gas aftertreatment. Emission Partner offers a suitable catalyst solution for all mine gas-powered CHP units. Our customers include well-known operators of mine gas engines who already rely on the know-how of Emission Partner engineers.
For mine gas engines, the formaldehyde limit value was reduced from 40 mg/Nm³ to 30 mg/Nm³ for existing plants with the enforcement recommendation Formaldehyde as of February 2018. Emission measurement must now be performed annually rather than triennially. Many plants that previously fell below the limit value entirely without exhaust gas aftertreatment must now retrofit catalytic converters for the first time.
Technologies
Do you need support with your landfill gas-fired CHP plant?
We will be happy to help you. Contact us!
Low emissions become a permanent task!
Our solution: EMI-LOG classic!
The 44th Ordinance of the Federal Immission Control (BImSchV) replaces the previously valid TA Luft, which regulated the emissions of combustion engines since 2002. All plants requiring a permit smaller than 1 MW and all plants with more than 1 MW rated thermal input are affected.
The regulations have been further specified by the Federal/State Working Group for Immission Control (LAI) on the basis of VDMA Standard Sheet 6299 and extended to all plants that receive the emission reduction bonus.
With the passing of the 44th BImSchV, in June 2019, Emission Partner has launched the EMI-LOG emission monitoring system to offer you as an operator a simple, stable and functioning solution.
EMI-LOG is an engine manufacturer independent and self-sufficient solution for all engine types, and in addition to continuous compliance with emission limits, you can also meet the requirement of effective operation of your catalyst.
The data to prove the effective operation of the exhaust aftertreatment system is stored DSGVO compliant, both locally and accessible to you in a cloud. With the conclusion of a service contract, you receive automated monthly/annual reports as proof for your authority.
Our catalysts for your project
MWM
Due to the many CHP manufacturers (SEVA, Pro2, ETW, Dreyer and Bosse) who have installed MWM engines for biogas operation, there is no standard catalyst for these engines (mostly TCG 2016 V12/V16). Because conversion requirements have increased, it is recommended to install a catalyst chamber with two thin catalyst discs that can be cleaned and changed individually as needed.
Jenbacher
Jenbacher engines, especially the Jenbacher 312, are very popular with German biogas farmers due to their reliability. These engines are also characterized by relatively high formaldehyde emissions, which pose a particular challenge to the catalysts. Emission Partner has developed its own catalyst line here, depending on the installation location, which reliably complies with the strict German formaldehyde requirement over several successive measurements.
MDE/MTU
SERIES 400
MDE gensets are MAN engine-derived cogeneration units with relatively low raw emissions and a large catalyst flanged to the exhaust gas heat exchanger (AWT). By design, this design has no slip compared to the AWT insert. These engines can also be operated without gas treatment with sulfur-resistant catalysts specially developed by Emission Partner.
MAN
CATALYTIC CONVERTER FOR ELECTRO HAGL ENGINES
This catalytic converter is flanged directly into the exhaust pipe after the turbocharger and has a distribution plate that significantly improves the flow onto the catalytic converter surface.
EXHAUST GAS HEAT EXCHANGER CATALYST
This catalyst is inserted directly into the heat exchanger on the hot gas inlet side. The flexible lamellar-spring rim reliably prevents gas from slipping past the catalytic converter.
Get in touch with us….
…if you want to be secured for the future and even
and even stricter limit values.
We are happy to help you!
Emission Stories
Satisfied customers are the best reference
This post is also available in: German
Sale
Emission Partner GmbH & Co. KGKarl-Wiechert-Allee 66
30625 Hanover
Phone: +49 4498 92 326 – 26
Fax: +49 4498 92 326 – 112
Production
Emission Partner GmbH & Co. KGIndustriestraße 5
26683 Saterland-Ramsloh
Phone: +49 4498 92 326 – 0
Fax: +49 4498 92 326 – 112